Cibolo, TX · Pool Deck Coating
Pool Deck Coating and Resurfacing in Cibolo
A pool deck has to be cool on bare feet, grip when wet and stand up to chlorine, sun and constant water. When the old finish is cracked, stained or peeling, resurfacing it is far less disruptive than tearing out the concrete.
01 — What this covers
The work itself
- Cool-deck style textured resurfacing
- Knockdown and spray-texture finishes
- Repair of cracked and delaminated pool decks
- Coping-edge and expansion-joint detailing
- Stain and seal for natural concrete decks
- Re-coating and re-sealing of existing finishes
02 — Detail
What a pool deck finish has to do
Of all the concrete around a house, the pool deck has the most demanding job. It is walked on barefoot in the hottest months, it is constantly wet and splashed with treated water, and it surrounds a place where a slip can be serious. A good finish is therefore judged first on temperature and traction, and only then on looks.
That is why glossy garage coatings are the wrong choice here. A smooth, dark film gets very hot in July sun and slick when wet. Pool decks in Texas are usually finished with light-colored, textured systems that reflect heat and give bare feet something to hold.
Chemical resistance matters too. Chlorine and salt systems are hard on some sealers, so the topcoat has to be chosen for pool use.
03 — Detail
Cool-deck and knockdown finishes
The classic answer is a cool-deck style acrylic or cementitious coating, troweled or sprayed in thin layers into a textured pattern. The light colors and texture keep the surface noticeably cooler than bare or dark concrete and give good grip when wet.
Knockdown finishes are similar: material is sprayed on and then lightly flattened with a trowel, leaving a pattern of soft, flat-topped islands. It is comfortable underfoot and hides minor surface imperfections.
Both are typically finished with a sealer suited to pool environments, which is renewed periodically to keep color and protection.
04 — Detail
Repair before resurfacing
Most pool deck calls start with a problem rather than a wish for a new color: an old coating flaking off in sheets, cracks running out from the coping, or a deck that has pulled away from the pool edge. Resurfacing over those without fixing them only buries the issue for a season.
Loose material is removed until only well-bonded surface remains. Cracks are opened and filled, and the joint between the deck and the pool coping — which moves differently from the slab — is sealed with a flexible material rather than coated over.
On the clay soils around Cibolo, pool decks can shift as the ground wets and dries. Large movement, or a deck sloping toward the pool or the house, is worth flagging before any finish is applied.
05 — Detail
Care through the season
Rinse the deck regularly to clear pool chemicals, sunscreen and leaves. Avoid high-pressure washing too close to the surface, which can damage textured finishes, and do not let standing water sit in low spots.
Plan to reseal every few years depending on sun and use. Resealing is quick compared with resurfacing and is the step that keeps color from fading and stains from setting.
If the pool itself is being replastered, coordinate the timing so the deck work does not damage the new pool finish, or the other way round.
06 — Detail
Choosing a color for a pool deck
Color on a pool deck is a comfort decision as much as a style one. Light tans, sand and pale greys reflect the most sun and stay the coolest underfoot. Darker colors look rich in photos and become uncomfortably hot by mid-afternoon in July.
The deck color also changes how the water looks. Warm, sandy decks make pool water read greener and more natural; cool grey decks make it read bluer.
If you are unsure, ask to see a sample patch outdoors on your deck at the time of day you use the pool most.
Timing also matters. Most pool deck resurfacing is best done in spring or fall, outside the peak of summer heat, when coatings cure more predictably and the pool is not in daily use.
How we work
Step by step
- 01
Photos of the deck and pool area, plus the approximate size
- 02
Inspection of cracks, drainage, coping and any loose old finish
- 03
Removal of failing material and repair of the slab
- 04
Textured finish applied in layers and colored
- 05
Sealer and cure time before the pool area is back in use
What it costs
Pool deck resurfacing is priced by area and by how much old material has to be removed. A deck with a sound base and a worn finish is straightforward; one with widespread delamination or cracks takes more repair first.
Questions
Pool Deck Coating — asked and answered
Can a cracked pool deck be resurfaced?
Usually yes, if the slab is basically sound. Loose material is removed, cracks are repaired and a new textured finish goes on top. Badly settled or broken sections may need concrete repair first.
What is the coolest pool deck finish?
Light-colored textured coatings such as cool-deck or knockdown finishes stay much cooler underfoot than dark or glossy surfaces.
How long does pool deck resurfacing take?
Many residential decks take a few days including preparation, application and cure, depending on size and repairs. Your installer will give a schedule after the inspection.
Can I use the pool while the deck is being resurfaced?
Generally not. The deck needs to stay dry and free of traffic until the finish and sealer have cured.
Also
Other coating services
Garage Floor Coating
A polyaspartic flake coating turns a stained, dusty garage slab into a hard, glossy floor that cleans with a m…
Epoxy Garage Floors
Epoxy is still the word most people use for any coated garage floor, and professionally installed epoxy has a …
Metallic Epoxy Floors
Metallic epoxy uses pigments that swirl and reflect light to create a marbled, almost liquid look. It is the m…
Concrete Patio Coating
Outdoor concrete has a harder life than a garage floor: full sun, rain, temperature swings and bare feet. A pa…
Driveway Coating & Sealing
A driveway carries the weight of every vehicle, bakes in full sun and drains the rain off your lot. The right …
Stained & Decorative Concrete
Not every concrete floor needs a thick coating. Stains, dyes and thin decorative overlays can transform plain …
Commercial & Shop Floors
Small warehouses, auto shops, retail floors, gyms and barns all need concrete that is easy to clean, resists w…
Service area